(c) 2003 Aqua Craft®, Inc. All rights reserved.

13045 PROCESS ®


Journey through this exceptional multi step disciplined technique to ultimate marine salt quality.


Step 1) Research and develop precise synthetic sea water formulations. Based on the successful reproduction of marine organisms, and for a variety of captive marine animal husbandry requirements.


Spiny box or blow fish (Diodon hystrix) Captive marine animals soon become your most cherished pets. Always use marine salts that conform consistently to natural sea water. Avoid poorly produced salts which are unreliable and can introduce harmful contaminants.
2) Utilize major components that are extracted from natural sources. These salts are then refined to our explicit, exacting, exclusive specifications. These select grade ingredients will produce marine salts that are the best for use in their intended application.

Prior to manufacturing marine salts, test and evaluate each major component for: pH, ammonia, nitrites, nitrates, phosphates, silicates, heavy metals and other undesirable properties found in inferior raw materials.


Sea life from all oceans relish residing in MEERSALTZ®. MEERSALTZ® is produced in tremendous quantities and is used world wide in a variety of public aquatic displays. is bioassay successful.
Reject commercial, fertilizer or low grade ingredients that will introduce unwelcome contaminants which can result in brown, red and/or slime algae. Use only AR (analytical grade 99.9+%) grade minor and trace elements. Be in control of harmful trace impurities.

3) Employ the exacting 13045 PROCESS® to manufacture the worlds most progressive, and consistently correct synthetic sea water / synthetic sea salt / marine salt formulations in the world.


Pomocanthus chrysurus (top), Chaetodon auriga (center), Heniochus acuminatus (bottom), Euxiphipopos navarchus (lower left) exhibit natural colors and behavior in Coral Marine® Scientific FormulaTM. Coral Marine® is very bioassay successful.
4) Preparation of ingredients, employing the 10345 PROCESS® and packaging must be performed in a scientific environmentally controlled clean room or enclosure.

5) Process all ingredients to a uniform particle size prior to compounding. Uniform particle size ingredients are required to maintain the integrity of homogenous mixed chemistry in sealed user packages. E.g. Non-uniform sized mixed chemistry will: a) not be proportionally mixed at the time of manufacture. b) will continue to separate in packages with simple handling prior to use.

Using a fraction of a package with varying particle salts will result in an unbalanced solution An unbalanced solution does not contain the correct proportion of all elements. This type of salt is totally unacceptable.


BIO-SEA® Marinemix is the worlds first and only True Sea Water FormulaTM. BIO-SEA® is highly bioassay successful. Sea plants, various beneficial algae and delicate corals require a consistently produced, complete sea water medium that is pollutant and contaminant free.
The 13045 PROCESS® assembles marine salts in a homogeneous blend of dry free flowing specially selected uniform size particle size ingredients. All elements in each formulation are equally distributed throughout each package.

All formulas hydrate easily, quickly and completely. Thus producing a superior optically clear sea water culture medium that is void of contaminants.


Marine Environment® dual phase formulaTM is the worlds first and only Reef Formula-. This unique two part superior synthetic sea water product has been used since 1971 in larva rearing and coral breeding programs. It is highly bioassay successful. This is undeniably the best synthetic sea water for all marine fish and reef aquariums.
Avoid non stainless steel equipment that is in intimate contact with ingredients or finished product. Non stainless steel mixers or transport equipment will result in rust. Thus contaminating marine salts. Fiberglass will suffer abrasions from ingredients and will soon be part of finished marine salts. Avoid using: conical screw, paddle, ribbon or dual or double cone mixers. Each of these devices has inherent limitations.

Rolling a drum around the floor is more laborious than using a cement mixer. These are the bottom most forms of quasi-scientific chemical compounding. Believe it or not, some marine salts touted as choice are produced with some of the equipment described.

The 13045 PROCESS® is an incomparable manufacturing technique used to produce marine salts of consistent unequaled quality and product integrity.

Initial selection of the proper marine salts dictates the future of your marine display. Consistency in marine salts equals consistent water quality. Consistent water quality means a lower maintenance and a superior marine aquarium display.



Be it: nano reefs, marine fish only, reef tanks, public aquariums, aqua culture onto all levels of scientific research world wide, all will benefit dramatically from utilizing marine salts produced with the exclusive and uncompromising 13045 PROCESS®.



Odonus niger (top), Centropyge loriculus (center), Amphiprion xanthurus (bottom), delicate algae and sea anemone thrive in synthetic sea water produced with the 13045 PROCESS®. The 13045 PROCESS® produces marine salts that are consistently correct and the best for use in keeping captive marine animals.
6) The 13045 PROCESS® is an ultra state-of-the-art manufacturing technique to produce the worlds most consistent marine salts. This fluxing procedure ensures that all elements are blended in a dry mixed crystal form without heat. It creates exceptional marine salt formulations in a pressure controlled, near weightless, anti gravity dry fluidized zone amalgamator.

7) Use only multiple material moisture/vapor barrier packages to insure and maintain product integrity for extended periods. This guarantees the end user of fresh high quality and stable marine salt chemistry.

8) Identify each master carton of marine salts with code numbers. These numbers indicate the production date which technicians inspected and produced the batch. Maintain a representative sample of each batch produced for extended quality control.These are some of the steps employed at the Aqua Craft®, Inc. mega state-of-the-art marine salt manufacturing facility that revolves around the 13045 PROCESS®.

The 13045 PROCESS® is a proprietary manufacturing
procedure employed exclusively by Aqua Craft®, Inc.

Aqua Craft products® are used internationally. in a variety Aqua Craft products® are used internationally. in a variety industry professionals and by knowledgeable individuals.

Aqua Craft products® are sold internationally by stores that understand their success depends on your success.

If it is not an Aqua Craft®. Inc. marine salts it was not produced with the 13045 PROCESS®.

ANYTHING else, IS LESSTM
(c) 2003 by Aqua Craft®, Inc. All rights reserved.


Back to AquaCraft Main Page





This URL is http://aqcraft.com/13045process.html
Fuji Publishing Group is not responsible for errors, typos or omissions.

Produced by Fuji Publishing Group
Jump back to the Fuji Cigar Page

Copyright © 1993-2008 Fuji Publishing Group All rights reserved.